topwell air/air mild steel plasma cutting machine POWERCUT-100HD
topwell air/air mild steel plasma cutting machine POWERCUT-100HD
topwell air/air mild steel plasma cutting machine POWERCUT-100HD
topwell air/air mild steel plasma cutting machine POWERCUT-100HD
topwell air/air mild steel plasma cutting machine POWERCUT-100HD
topwell air/air mild steel plasma cutting machine POWERCUT-100HD
Model
PowerCUT-100H

Item specifics

Rated Input Voltage
340-460V, 3-PH, 50-60Hz
Rated Output Currant
30-100A
Max Open Circuit Voltage
15KVA
Rated output voltage
120VDC
Duty cycle rating40°C(105°F) 380V /400V, 3PH :
100% @80A
Operating temperature
-10°C~40°C
Arc ignition mode
HF or Not HF
Warranty
1 year warranty
Dimensions
680X310X650MM
Weight
42KG

Review

Description

  • PowerCUT-100H

    Classical, Reliable, Powerful, wildly used for Manual cutting, Gouging or even CNC cutting

    • Application:

      Home workshop
      Metal workshops
      Light fabrication
      Repair and maintenance
    • These Materials:

      Mild Steel
      Brass
      Stainless Steel
      Copper
      Aluminum
    • Input Power: 340-460V, 3-Phase

      Amperage Range: 30-100A
      Rated Output at 40℃ (104℉):
      100A at @60% Duty Cycle
      Weight: 42KG

       

    Excellent Cutting Performance

    - A powerful 60% duty cycle to handle long time production cutting in the toughest environments.

    - Optional HF or Non-HF plasma Torch, more flexible.

    - The torch is versatile and durable enough to handle a variety of jobs.

    - Finish jobs faster with cut speeds two and three times greater than other traditional cutting process.

    - Speed less time on secondary operations due to superior cut and gouge capacity.

    - Topwell’s long-life consumable deliver operating cost that is less than half the competition.

    General View of Control Panel

    • 1.Ammeter/Voltmeter Display

      2.Encoder Control

      3.Mode:2T(STD)/4T(HOLD)

    CUTTING CAPACITY

    CapacityThickness Cut speed
    Recommended cut30mm500mm/min
    Severance(Hand cutting)45mm125mm/min
    Pierce*16mm

    *Pierce rating for handheld or with CNC torch height control

    Gouge capacityRemoval rate Groove profile
    Plasma gougingn
    Typical gouge8.8kg/h5.8mm Dx 7.1mm W


    Non-HF Arc Ignition system

    • Torch off.
    • By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.
    • The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.
    • By positioning the torch on the part to be cut, theplasma arc will strike.
       
       
       
       

    Torches with pilot arc cut in without high frequency.

    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions.

    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).



  • Item No PowerCUT-100H
    Input voltages (±15%) 380V, 3PH, 50/60Hz
    400V, 3PH, 50/60Hz
    Max. Load Power Capacity 15KVA
    Rated output voltage 120VDC
    Max output current 100A
    Open circuit voltage (OCV) 280VDC
    Duty cycle rating40°C(105°F) 380V /400V, 3PH : 60% @100A
    100% @80A
    Operating temperature -10°C~40°C
    Dimensions 680*310*650mm
    Weight 42kg
    Recommended gas inlet flow rate/pressure Cutting: 460 scfh, 7.7 scfm @ 85 psi
    Gouging: 480 scfh, 8.0 scfm @ 70 psi
    Arc ignition mode HF or Not HF
    Certifications CE, ROHS
    Warranty Power supplies have a 3-year warranty
  • ACCESSORIES

      

      

    Handheld plasma torch: TP80 torch


      

      

    CNC torch: TP105


      

      

    Handheld gouging torch: TP120


      

      

    Mechanical gouging torch: TP120

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly

    air mild steel plasma cutting machine

    CNC plasma cutter

    plasma cutting machine cut 30mm

    air plasma cutter

    plasma cutting machine