TOPWELL 100amp 340V plasma cutter PROCUT-105HD
TOPWELL 100amp 340V plasma cutter PROCUT-105HD
TOPWELL 100amp 340V plasma cutter PROCUT-105HD
TOPWELL 100amp 340V plasma cutter PROCUT-105HD
TOPWELL 100amp 340V plasma cutter PROCUT-105HD
TOPWELL 100amp 340V plasma cutter PROCUT-105HD
Model
PROCUT-105HD

Item specifics

Rated Input Voltage
3PH ~ 400V ±15%
Max Input current
340/460V, 60/44A
Max Open Circuit Voltage
16KVA
Effiency
85%
Duty cycle @40℃ (104 ℉)
100%@105A
Output current
30-105A
Power supply type
Inverter-IGBT
Warranty
1 year warranty
Dimensions
680X310X650mm
Weight
45KG

Review

Description

  • PROCUT-105HD

    HD CNC Cutting, Great for a wild thickness from 1mm to 15mm

    • Application:

      Home workshop
      Metal workshops
      Light fabrication
      Repair and maintenance
    • These Materials:

      Mild Steel
      Brass
      Stainless Steel
      Copper
      Aluminum
    • Input Power: 340-460V, 3-Phase

      Amperage Range: 30-105A
      Rated Output at 40℃ (104℉):
      105A at @60% Duty Cycle
      Weight: 45KG

       

    Excellent Cutting Performance

    Maximum productivity

    ·The cutting speed of dross free can reach 900mm/min for 16mm mild steel.

    Higher reliability and stability

    ·Designed with 100% duty cycle for the most demanding production environments.

    ·Designed and tested as the TOPWELL PROCUT series product for superior reliability in the most demanding cutting environments.

    Long life consumables

    ·Reduce costs with long consumables life and more up time.

    Economic

    ·Low maintenance for maximum uptime.

    General View of Control Panel

    1.Ammeter/Voltmeter Display

    2.Encoder Control

    3.Mode:2T(STD)/4T(HOLD)

    CUTTING CAPACITY

    CapacityThickness Cut speed
    Dross free(CNC)16mm900mm/min
    Pierce*22mm 
    Cut angle(ISO9013)Range 2
    Severance(Hand cutting)50mm125mm/min

    *Pierce rating for handheld or with CNC torch height control

    Gouge capacityRemoval rate Groove profile
    Plasma gougingn
    Typical gouge8.8kg/h5.8mm Dx 7.1mm W

    Non-HF Arc Ignition system

    • Torch off.
    • By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.
    • The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.
    • By positioning the torch on the part to be cut, theplasma arc will strike.
       
       
       
       

    Torches with pilot arc cut in without high frequency.

    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions.

    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).



  • Item No PROCUT-105HD
    Input voltages (±15%) 380V, 3PH, 50/60Hz
    400V, 3PH, 50/60Hz
    220V, 3PH, 50/60Hz
    Max. Load Power Capacity 16KVA
    Rated output voltage 160VDC
    Max output current 105A
    Duty cycle rating 40°C(105°F) 380V /400V: 100% @105A
    220V : 80% @105A
    100% @88A
    Operating temperature -10°C~40°C
    Open circuit voltage (OCV) 350VDC
    Dimensions 680*310*650mm
    Weight 45KG
    Torch TP105, 7.5m
    Recommended gas inlet flow rate/pressure Cutting: 460 scfh, 7.7 scfm @ 85 psi
    Gouging: 480 scfh, 8.0 scfm @ 70 psi
    Gas supply Clean, dry, oil-free air or nitrogen
    Certifications CE, ROHS
    Warranty Power supplies have a 3-year warranty
  • ACCESSORIES

    PLASMA torch:TP105

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly

    CNC plasma cutter

    cutter machine

    industrial 105A plasma cutter

    plasma cutting machine portable

    plasma cutting machine