TOPWELL metal plasma cutter PROCUT-75MAX

Group All products
Min. Order 1 piece
Terms of Payment L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Update Time 2019-02-22
Item specifics
Rated Input Voltage3PH ~ 400V ±15%
Rated Output Currant30-75A
Rated Output Voltage145V
Effiency85%
Max. Load Power Capacity10KVA
Power supply typeInverter-IGBT
Max Input current340/460V, 32/24A
Warranty1 year warranty
Dimensions560X230X480mm
Weight22KG
Description
  • PROCUT-75MAX

    Classical, Reliable, Powerful, wildly used for Manual cutting, Gouging or even CNC cutting

    • Application:

      Home workshop
      Metal workshops
      Light fabrication,
      Repair and maintenance
    • These Materials:

      Mild Steel
      Brass
      Stainless Steel
      Copper
      Aluminum
    • Input Power: 340-460V, 3-Phase

      Amperage Range: 30-75A
      Rated Output at 40℃ (104℉):
      75A @60% Duty Cycle
      Weight: 22KG

       

    ADVANTAGES

    • - Light weight, compact design and convenient mounting feet allow for easy mounting in any application.

      - Finish jobs faster with cut speeds two and three times greater than other traditional cutting process.

      - Speed less time on secondary operations due to superior cut and gouge capacity.

    • - A powerful 60% duty cycle to handle long time production cutting in the toughest environments.

      - The torch is versatile and durable enough to handle a variety of jobs.

      - Topwell’s long-life consumable deliver operating cost that is less than half the competition.

    General View of Control Panel

      1.Ammeter Display

      2.Encoder Control

      3.2T Control

      4.Torch lock

      5.Metal Net Cutting Process

      6.Gouging Process

      7.Mode Selection

    CUTTING CAPACITY

    CapacityThickness Cut speed
    Recommended cut25mm500mm/min
    32mm250mm/min
    Severance(Hand cutting)38mm125mm/min
    Pierce*20mm
    Cut angle(ISO9013)Range 2
    Severance(Hand cutting)50mm125mm/min

    *Pierce rating for handheld or with CNC torch height control

    Gouge capacityRemoval rate Groove profile
    Plasma gougingn
    Typical gouge9.8kg/h6.4mm Dx 7.4mm W


    Non-HF Arc Ignition system

    • Torch off.
    • By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.
    • The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.
    • By positioning the torch on the part to be cut, theplasma arc will strike.
       
       
       
       

    Torches with pilot arc cut in without high frequency.

    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions.

    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).



  • Item No PROCUT-75MAX
    Input voltages (±15%) 380V, 3PH, 50/60Hz
    400V, 3PH, 50/60Hz
    220V, 1PH, 50/60Hz
    Max. Load Power Capacity 10KVA
    Rated output voltage 145VDC
    Max output current 75A
    Open circuit voltage (OCV) 300VDC
    Duty cycle rating 40°C(105°F) 380V/400V: 60% @75A
    100% @60A
    220V: 60% @75A
    100% @ 60A
    Operating temperature -10℃~40℃
    Dimensions 540x240x480mm
    Weight 22KG
    Torch PT80,6m
    TP105,7.5m
    Recommended gas inlet flow rate/pressure CUTTING:400 scfh, 6,7 scfm @ 85 psi
    Gouging:450 scfh, 7,5 scfm @ 70 psi
    Certifications CE, RoHS
    Warranty Power supply: 3-year
    Torch: 1-year
  • ACCESSORIES

      

      

    Handheld plasma torch: TP80 torch


      

      

    CNC torch: TP105


      

      

    Handheld gouging torch: TP120


      

      

    Mechanical gouging torch: TP120

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly