High Definition Plasma Cutting Plasma Source MAX300 with TP300MAX Oxygen Process hy replacement
- Model
- MAX300
Item specifics
- Input Voltage
- 3PH ~ 400V ±15%
- Duty Cycle Rating 40℃(105℉)
- 300A@100%
- Plasma Gas
- O2; Air; N2; H35
- Shield Gas
- O2; Air; N2;
Review
Description
DETAILS
MAX300
Extra-Definition, Maximized productivity across a broad range of application needs, from very thin to heavier thicknesses.
Cutting Capacity
|
Mild Steel Cut Capacity
|
Thickness
|
|
Dross free*
|
35mm |
|
Production pierce
|
42mm
|
Maximum cutting capacity | 70mm |
Superior Cutting Performance
Optimized gas parameters are set and controlled by the software. With Oxygen/Air/N2/H35 plamsa gas, the HD MAX series plasma cutting system achieves impressive cut speeds, consistent cut quality and exceptional consumable life.
Maximized Productivity
· MAX Series provides faster cutting speed to maximize productivity.
· Engineered with 100% duty cycle for the most demanding production environments.
Long-life Consumables
The MAX300 system ramps current and gas flow up and down in a tightly controlled manner to reduce electrode and nozzle erosion.
Reducing electrode and nozzle erosion enables more consistent cut quality over a longer period of time, while providing a significant reduction in operating cost.
· Ignitions per cutting time in seconds
· 20 second duration
· MAX300 : 810 times
Efficient Gas Supply
The MAX300 plasma systems significantly increase the efficiency of gas and reduce the gas consumption.
· Cutting Current: 300A
· Gas consumption:
Plasma Gas: 60 l/min
Shielding Gas: 75 l/min
Bevel Cutting Technology
Bevel Cutting Technology is a performance application for mild steel. Factory tested and easily implemented, it takes the guesswork out of the plasma bevel-cutting process. With Bevel Cutting Technology, setups for new jobs are quick and results are accurate and consistent.
· 1 iteration
· Using True Bevel
· Acceptable part and ready to start production
Refined Torch System
· Vented nozzle technology aligns and focuses the plasma arc.
· High Definition Cutting enables powerful precision cutting for superior quality and consistency on mild steel.
· High Definition delivers superior quality to thin stainless steel cutting.
VIDEO
SPECIFICATIONS
Machines
|
Product Name
|
MAX300
|
|
Cut angle（ISO 9013 range*）
|
2
|
|
Weldability
|
Ready to weld
|
|
Plasma Gas
|
O2; Air; N2; H35
|
Shield Gas | O2; Air; N2; |
Product Weights & Dimensions
|
Dimensions(L*W*H)
|
450*800*950mm
|
|
Net Weight
|
252KG
|
Basic Specification
|
Input Voltage
|
380V/400V, 3PH, 50/60Hz
|
|
Input Power
|
75KVA
|
|
Rated Output Voltage
|
50~200VDC
|
|
Rated Output(40℃) 100%
|
300A
|
Open Circuit Voltage (OCV) | 430VDC |
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
YOU MAY ALSO NEED
TP300MAX consumable Kit
TP260XD
TP260XD Consumable Kit
Gas Console (H35/N2)
Gas Console (Air/Air)
