HD200W Heavy Duty, Long Life and High Performance Plasma Cutting System
- Model
- HD200W
Item specifics
- Input Voltage
- 3PH ~ 400V ±15%
- Duty Cycle Rating 40℃(105℉)
- 200A@100%
- Maximum Cutting Capacity
- 60mm
Review
Description
DETAILS
HD 200W
Heavy Duty, High Performance, Long Consumable Life Plasma Cutting System
Cutting Capacity
|
Mild Steel Cut Capacity
|
Thickness
|
|
Production Pierce
|
32mm |
|
Maximum Cutting Capacity
|
60mm
|
|
Stainless Steel Cut Capacity
|
Thickness
|
Production Pierce | 25mm |
Aluminum Cut Capacity | Thickness |
Production Pierce | 25mm |
High Performance Cutting
• HD200W plasma cutting system cuts fine-feature parts with superior quality and consistency, eliminating the cost of secondary operations.
• The focused plasma arc for more powerful precision cutting up to 32mm on Mild Steel and 25mm on Stainless steel and Aluminum.
• With water spray cutting process, the stainless steel and aluminum cutting will be less warping and produce a small heat-affected zone.
Water Mist Secondary (WMS) Technology
Long Consumable Life & Fast Cutting Speed
• 12mm mild steel；
• 200A Air/Air；
• 20s duration;
• The number of consumable starts can reach more than 500 times (ISO9013 Range 2).
Fast Cutting Speed
The cutting speed of dross free can reach 1600mm/min for 20mm mild steel.
Bevel Cutting Technology
Bevel Cutting Technology is a performance application for mild steel. Factory tested and easily implemented, it takes the guesswork out of the plasma bevel-cutting process. With Bevel Cutting Technology, setups for new jobs are quick and results are accurate and consistent.
• 1 iteration
• Using True Bevel
• Acceptable part and ready to start production
Refined Torch System
• Double air system torch
• Nozzle cooling for increased electrode life and reduced operating costs
• Work with TOPWELL high voltage power source to shift the cutting limitation
VIDEO
SPECIFICATIONS
Machines
|
Product Name
|
HD200W
|
|
Cut angle（ISO 9013 range*）
|
2
|
|
Weldability
|
Ready to weld
|
|
Plasma gas
|
Air
|
Shield gas | Air; Water Spray |
Product Weights & Dimensions
|
Dimensions(L*W*H)
|
960*420*1100mm
|
|
Net Weight
|
156KG
|
Basic Specification
|
Input Voltage
|
380V/400V, 3PH, 50/60Hz
|
|
Input Power
|
50KVA
|
|
Rated output voltage
|
50~200VDC
|
|
Rated Output(40℃) 100%
|
200A
|
Open circuit voltage (OCV) | 430VDC |
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
YOU MAY ALSO NEED
TP300 Consumable Kit
