- Rated Input Voltage
- 1PH ~ 230V ±15%
- Rated Output
- Max Open Circuit Voltage
- 7.1 KVA
- 1 year warranty
- Light Industrial Application:
- Installation and set-up
- Repair and maintenance
- Chemical and process industry
- Shipyards and off-shore industry
- Pipe welding outside
- Stick (SMAW)
- Input Power:ARC-200i: 230V, 1-Phase
- ARC-250i: 380V, 3-Phase
- Amperage Range: 200i:10-200A/250i:20-
- Rated Output at 40℃ (104℉):
- 200i:160A at 26.4V @60% Duty Cycle
- 250i: 250A at 30V @60% Duty Cycle
- Weight:14/16 KG
General View of Control Panel
2.Arcforce rotary dial
To adjust the welding parameters to the electrode
type used.Infinite setting from rutile (soft arc)
to cellulose (hard arc) electrode types.
3.Hotstart current rotary dial
Increased ignition current during the set
hotstart period to optimise the arc ignition.
Setting from 20 A to 200 A.
4.Hotstart period rotary dial
Increased ignition current (hotstart current)
flows during the period set. Setting from 0s to 2s.
5.Welding current setting rotary dial
Infinite setting of the welding current across
the whole power range.
Hot start function reliably ignites the electrode and melts
perfectly to ensure the best quality even at the start of
the seam. This solution makes lack of fusion and cold welds
a thing of the past and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
Arcforce correction (welding characteristics)During the welding process, arcforce prevents the electrode sticking in the weld pool with increases in current.
This makes it easier to weld large-drop melting electrode types at low current strengths with a short arc in particular.
topwell high quality portable MMA welding machine ARC-200i
Item No ARC-200i ARC-250i Rated Input Voltage 1PH ~ 230V ±15% 3PH ~ 400V ±15% Max. Load Power Capacity 7.1 KVA 8.3 KVA Rated Duty Cycle(40oC) 60% 200A/28V 250A/30V 100% 160A/26.4V 200A/28V Welding Current/Voltage Range 10A/20.4V~200A/28V 20A/20.8V~250A/30V Open Circuit Voltage 60V~80V 60V~80V Power Factor 0.73 0.92 Efficiency 80% 85% MMA Arc Force 10A~100A 10A~160A Hot Start Time 0.1S~2S 0.1S~2S Hot Start Current 10A~130A 10A~160A Dimension 410X190X305mm 430X210X340mm Weight 14 KG 16 KG
/ACCESSORIESFor Standard accessoriesHand helmet Brush/hannerElectrode holder with cable 2MFor Optional accessoriesTIG torch: TIG-26
Arc 200i welding from Topwell.