portable workshop cnc ready 1PH 220V plasma cutter topwell PROCUT-45MAX
portable workshop cnc ready 1PH 220V plasma cutter topwell PROCUT-45MAX
portable workshop cnc ready 1PH 220V plasma cutter topwell PROCUT-45MAX
portable workshop cnc ready 1PH 220V plasma cutter topwell PROCUT-45MAX
portable workshop cnc ready 1PH 220V plasma cutter topwell PROCUT-45MAX
portable workshop cnc ready 1PH 220V plasma cutter topwell PROCUT-45MAX
Model
PROCUT-45MAX

Item specifics

Rated Input Voltage
3PH ~ 400V ±15%
Rated Output Currant
30-45A
Rated Output Voltage
145V
Effiency
85%
Max. Load Power Capacity
8.16KVA
Power supply type
Inverter-IGBT
Torch
PX62/6m PXM62/7.5m
Warranty
1 year warranty
Dimensions
560X230X480mm
Weight
22KG

Review

Description


ProCUT-45MAX
Recommend for Hand-held cutting 16mm and CNC up to 8mm

 For Mild Steel Cutting:         Thickness:                 Cut Speed:

 Dross Free(CNC)                          8mm                               900mm/min

 Pierce*                                           12mm

 Recommended                              16mm                               500mm/min

 Severance(Hand Cutting)              29mm                               125mm/min

ADVANTAGES


Powerful Output

Powerful output-40A@60%, at 40℃(104℉), the quality cutting capacity is up to 16mm(manual) and 8mm(CNC dross-free);
High output voltage-145VDC ensures a long plasma arc length;

Light weight

Portability-small size and light weight allow for easy mounting in any application;

Maximum productivity

Maximum productivity-Finish jobs faster with cut speeds two and three times greater than other traditional cutting process;
Superior cut performance-Significantly save a lot of time on secondary operations;

Long-life and reliability

TOPWELL's long-life consumable-deliver operating cost that is less than half the competition;
TOPWELL certified reliability-ensures performance in the most demanding environment.

SPECIALLY DESIGNED TORCH

*Work with TOPWELL high voltage power source to shift the cutting limitation

Technical specifications

Item No
ProCUT-45MAX
Input voltages (±15%)
220V, 1PH, 50/60Hz
Max. Load Power Capacity
8.16KVA
Rated output voltage
145VDC
Max output current
45A
Open circuit voltage (OCV)
300VDC
Duty cycle rating 40°C(105°F)
45A@60%
Operating temperature
-10℃~40℃
Dimensions
540x240x480mm
Weight
22KG
Torch
PX62/6m
PXM62/7.5m
Recommended gas inlet
flow rate/pressure
CUTTING:
400 scfh, 6.7 scfm @ 85 psi
Certifications
CE, RoHS
Warranty
3-Years warranty for power source

Plasma Torch: PX62/PXM62

Technical Data
    Amps
    50-80A
    Duty Cycle
    80A/60%
    Gas
    AIR/O₂
    Pressure
    5.0~5.5BAR
    Gas Flow
    160 It/min.
    Pilot Arc
     Electrode to Tip
    Post Flow Time
     80 sec.
    Ignition
    Without High Frequency
  • Single air-system with shield gas
  • *Work with TOPWELL high voltage power source to shift the cutting limitation
  • Torch consumable parts
    Amperage
    Nozzle
    Shield
    Retaining cap
    Electrode
    Swirl ring
    Shield cap
    Torch body
    20A
    TP080207
    TP0803
    TP0806
    TP0801
    TP0804
    TP0808
    TP0709
    30A
    TP080208
    40A
    TP080209
    50A
    TP080210
    60A
    TP080211

    Accessories

    BK-1054
  • Auto-darkening helmet
  • Large 9.3- square-inch viewing area
  • Fast switching
  • Dual sensors
  • Always on-just to pick up and start cut and weld


  • BK-0328
  • Fire resistant goatskin leather and suede.
  • Padded areas for extra heat and abrasion protection.
  • AW-2000/AW3000
    High quality air regulator kit