ALUTIG-400CT AC/DC TIG Welder For Heavy Industrials
- Model
- ALUTIG-400CT
Item specifics
- Input Voltage
- 3PH ~ 400V ±15%
- Rated Output(40℃) 60%
- 400A/26V
- Features
- AC TIG, MIX TIG, DC TIG
Review
Description
DETAILS
Reliability, Powerful and Precise TIG welding
AC/DC TIG & MIX TIG
ALUTIG-400CT
DC TIG - features the Pulse function, it precisely controls the welding arc, heat input and penetratoin.
AC TIG - with 4 kinds of AC waveshapes(square wave and sin wave), and 3 kinds of AC waveshape controls(Balance, Frequency and Amplitude).
MIX TIG- has both AC current and DC current in one duty cycle, better arc concentration and deeper penetration.
Reliable and Powerful Design - 400A@60% duty cycle, capable for Light Industrial jobs.
High Efficiency TIG Welding
The Maximum Output Is Up To 320A. It's Capable To Welding Thin Metal Fast And Thick Metal Continuously.
Mild Steel 12mm V Groove, 5 Layers
Layer 1: 300A, Layer 2: 300A, Layer 3: 280A,
Layer 4: 280A, Layer 5: 260A
Advanced Pulse Controls
The Pulsed TIG function switches the amperage from a high (peak) to a low (background) at a set rate (PPS). Pulsing can reduce heat input by lowering the average amperage, increasing control of the weld puddle, penetration and distortion.
Control Panel Description
1. Welding Process
DC TIG/AC TIG/MIX TIG/DC MMA
2. Pulser Control
3. AC Waveshape Types
Advanced Squarewave / Soft Squarewave
Triangular Wave / Sine Wave
4. MIX TIG
5. AC Waveshape
AC Frequency Range: 20Hz~200Hz
AC Clean Width (AC Balance): +40~-40
AC Clean Ratio (AC Bias)%: +30~-50
AC Frequency control
Controls the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control.
Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead.
AC Balance Control
Controls arc cleaning action. Adjusting the % EN of the AC wave controls the width of the etching zone surrounding the weld.
Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are.
Amplitude Control
Adjusts The Ratio Of EN To EP Amperage To Precisely Control Heat Input To The Work And The Electrode.
Note: EN Amperage Controls The Level Of Penetration, While EP Amperage Dramatically Effects The Arc Cleaning Action Along With The AC Balance Control.
Unique MIX TIG
· Nice weld seam, Excellent arc concentration
· Deeper penetration
· Substantially reduce the tungsten consumption
VIDEO
SPECIFICATIONS
Machines
|
Product Name
|
ALUTIG-400CT
|
|
Machines Processes
|
Stick (SMAW)
TIG (GMAW) Pulsed TIG (GTAW-P) |
Product Weights & Dimensions
|
Dimensions(L*W*H)
|
960x420x900mm
|
|
Net Weight
|
80KG
|
Basic Specification
|
Input Voltage
|
3PH ~ 400V ±15%
|
|
Input Power
|
TIG: 14.39KVA MMA: 14.21KVA |
|
Output Range
|
TIG: 20A/10.8V~400A/26V MMA: 20A/20.8V~315A/32.6V |
|
Rated Output(40℃) 60%
|
TIG: 400A/26V MMA: 315A/32.6V |
Polarity | AC/DC |
YOU MAY ALSO NEED
T5W
Foot Pedal
Cold Wire Feeder With Auto-Feeding Torch
